Original articles
D. Kusumoto, K. Suzuki
Induction of traumatic resin canals in Cupressaceae
by ethrel application 1
Y. Kawai, Y. Kobayashi, M. Norimoto
Hybrid drying with high-frequency and hot
air under atmospheric pressure II: Relationship
between temperature and pressure during high-frequency
heating in Cryptomeria japonica square lumber 7
A. Koizumi, T. Sasaki, J. L. Jensen, Y. Iijima,
K. Komatsu
Moment-resisting properties of post-to-sill
joints connected with hardwood dowels 14
H.-M. Park, M. Fushitani, T. Ohtsuka, T.
Nakajima, K. Sato, H.-S. Byeon
Effect of annual ring angle on static bending
strength performances of cross-laminated
woods made with sugi wood 22
H. Sunahara, H. Ohi
Structurai analysis of residual lignin in
eucalyptus kraft pulp by pyrolysis gas-chromatography 33
T. Miyauchi, Y. Sano, K. Umehara, N. Saito
Oil sorbent material of heat treated wood
fiber I: Effect of pyrolysates on oil sorption
capacity 39
Notes
K. Iizuka, K. Takakura, M. Ubukata
Variation of basic density in offspring families
of Abies sachalinensis 44
M. Ohkoshi, H. Saijo
Chemiluminescence and discoloration of light-irradiated
wood surface 52
T. Matsui, Y. Matsushita, K. Sugamoto, K.
Ogawa, A. Komiyama, S. Muta
Mycelial growth inhibition of shiitake (Lentinus edodes) by several terpenoids isolated from sugi
(Cryptomeria japonica) wood 58
T. Takei, F. Eguchi, H. Yoshimoto, N. Kammba,
T. Iijima, M. Higaki
Physiological factors affecting mycelial
growth of Agaricus blazei CJ-01 II: Degradation of culture-source
and acceleration of mycelial growth by compost
preparation 63
Proceedings of the Society 70
Original articles
M. Kawazoe, N. Sobue, N. Hirai
Analysis of bending creep of wood under natural
environmental condition by Fourier transformation
procedure 73
M. Kawazoe, N. Sobue
Effects of moisture cycling period and cross
sectional size of a specimen on bending creep
of wood under humidity cycling
81
M. Tonosaki, S. Saito, Y. Hiramatsu
Evaluation of non-homogeneity in wood by
longitudinal and flexural vibration tests
I: Distribution of vibrational properties
and FEM simulation of sugi boxed heart square
sawn timber 92
T. Ohgama, H. Ishikawa, M. Norimoto, N. Kamba
The humidity control effects of woods and
artificial woods made of ceramics
97
K. Komatsu
Structural performance of glulam semi-rigid
portal frames constructed by hardwood wedge
joint technique II: Theoretical analysis
on the lateral shear deformation of the portal
frame 103
K. Matsumoto, H. Yamauchi, M. Yamada, K.
Taki, H. Yoshida
Manufacture and properties of fiberboard
made from moso bamboo 111
T. Fujita, N. Komatsu, S. Kawai
Manufacture and properties of gypsum bonded
particleboard I: Effects of the press time,
water-gypsum hemihydrate ratio and resin
content on board properties
120
A. Suematsu, N. Sekino, Y. Fujimoto, Y. Kitani,
Q. Wang
Effects of manufacturing parameters on the
linear expansion of densified wood composite
panels II: Effect of board densities, resin
types and resin contents on linear expansion
particleboard 129
S. Ohba, T. Sasada, S. Kawai
Development of vertically oriented fiberboard
I: Manufacture of fiberboards and analysis
of fiber orientation 138
S. Ohba, T. Sasada, S. Kawai
Development of vertically oriented fiberboard
II: Fundamental properties of vertically
oriented fiberboard 150
Y. Tamaki, K. Kinjo, S. Uechi, F. Hongo,
K. Sameshima, S. Yaga
Cholesterol-lowering effect of water-soluble
polysaccharides from kenaf (Hibiscus cannabinus) seeds in rats I 159
T. Kitamura, H. Katayama
The effect of carbonizing conditions on the
specific surface area of charcoal from sugi
(Cryptomeria japonica) wood 164
A. Sasaki, S. Yomogida, Y. Umetsu, E. Narita
Influence of pretreatment with hydrogen sulfide-type
hot spring water on carbonization of woods
171
Proceedings of the Society 180
Original articles
M. Tokumoto
Bending creep and set of small wood beams
during adsorption and desorption cycles
189
M. Inoue, K. Adachi, K. Kanayama
Cupping of compressed wood resulting from
set recovery 198
T. Higashihara, T. Morooka, M. Norimoto
Permanent fixation of transversely compressed
wood by heating and its mechanism
205
T. Ohuchi, Y. Murase
Milling of wood and wood-based materials
with a computerized numerically controlled
router I: On the machining accuracy for grooving
212
C. Zhao, K. Ando, N. Hattori, S. Kitayama
Size and shape of airborne dust from wood
sanding I: Size and shape index distributions
of airborne dust 218
C. Zhao, K. Ando, N. Hattori, S. Kitayama
Size and shape of airborne dust from wood
sanding II: Effects of sanding conditions
on size and shape 227
A. Kamaguchi, T. Nakao, T. Nakai, A. Tamura
Measurement of heartwood moisture content
of sugi by the lateral impact vibration method:
Comparison of the data obtained from the
moisture meter method and measurement of
longitudinal distribution
235
K. Yanaga, Y. Sasaki, T. Hirai
Estimation of allowable resistance of nailed
shear walls considering the variance of nailed
joint resistance 242
H. Ido, M. Okuma, K. Oda
Evaluation of shear properties of the framework
wall construction composed of curved LVLs
I: Fundamental mechanical properties of curved
LVLs and framework panels composed of curved
LVLs 252
T. Ueno, X.-L. Geng, T. Ashitani, M. Oyadomari,
K. Sakai
Liquefaction of sugi (Cryptomeria japonica) bark by polyethyleneglycol-bisulfite method
260
Y. Ohtani, M. Kirishima, K. Sameshima
Effects of hydration on termiticidal and
anti-fungal activities of the wood essential
oils 267
T. Ashitani, M. Ujike, S. Nagahama, T. Ueno,
K. Sakai
Characterization of sugi (Cryptomeria japonica) bark extracts 276
Proceedings of the Society 282
Original articles
N. Mikajiri, J. Matsumura, M. Okuma, K. Oda
Observation by LV-SEM of shrinkage and anisotropy
of tracheid cell with desorption
289
X. Chen, S. Kimura, S. Ozaki, H. Yokochi,
H. Yonenobu
Effect of fiber orientation on chip swelling
under orthogonal cutting
295
X. Yang, Y. Ishimaru, I. Iida, H. Urakami
Application of modal analysis by transfer
function to nondestructive test of wood I.
The determination of localized defects in
wood by the shape of flexural vibration wave
304
H. Ido, M. Okuma
Evaluation of shear properties of the framework
wall construction composed of curved LVLs
II. Comparisons of the shearing rigidity
of panels composed of curved LVLs with various
conservative construction panels
311
K. Aoki, T. Tsuchimoto, N. Ando
Effects of shear wall configuration on lateral
deformations of conventional Japanese timber
structure I. Prediction of static lateral
deformations based on an elastic shear spring
model 317
K. Nakata, H. Sugimoto, M. Inoue, S. Kawai
Development of compressed wood fasteners
for timber construction V. Strength properties
of drift-pinned timber joints with compressed
LVL plates 327
H. Yano, A. Hirose, N. Clark, P. Collins,
Y. Yazaki
Effects of high temperature and high pressure
alkaline pretreatments for the production
of high strength resin-impregnated compressed
wood 337
M. Kishino, H. Ohi
Low chlorine dioxide bleaching of Kraft pulp
using nitrous acid treatment
344
Notes
F. Ishiguri, M. Andoh, S. Yokota, N. Yoshizawa
Effect of smoke heating on moisture content,
surface checking, dynamic Young's modulus
of sugi (Cryptomeria japonica) boxed heart timber 350
T. Tsujino, N. Tateuchi, T. Kawai
Collapse loads of drift pin timber joints
loaded perpendicular to the grain II.
358
Proceedings of the Society 364
Original articles
H. Matsunaga, J. Matsumura, K. Oda
Distribution of inorganic elements in wood
impregnated with preservative solutions II:
Effect of anatomical characteristics on preservatives
microdistribution in Cryptmeria japonica 383
Y. Cai, K. Hayashi, M. Sugimori
Three dimensional measurement of temperature
distribution in wood during radio-frequency/vacuum
drying 389
J. Umetsu, K. Ohsawa
Contact length of abrasive belt on workpiece
in wood belt grinding with contact wheel
397
H. Guan, Y. Nishino, C. Tanaka
Longitudinal natural frequencies of softwood
logs in the natural drying process
405
X. Yang, T. Amano, Y. Ishimaru, I. Iida
Application of modal analysis by the transfer
function on non-destructive test of wood
II: Elasticity evaluation of different quality
part within wooden beam by the curvature
on flexural vibration wave
412
K. Hayashi, M. Ohmi, H. Tominaga, M. Fushitani,
K. Fukuda
Production of veneer-reinforced corrugated
particleboard and effects of board density
on bending properties 420
A. Suematsu, N. Sekino, Y. Fujimoto, Y. Kitani,
Q. Wang
Effects of manufacturing parameters on the
linear expansion of densified wood composite
panels III: Effect of board densities, resin
types and its contents on linear expansion
of medium density fiberboard
431
Notes
E. Obataya, Y. Ohno, B. Tomita
Changes in the vibrational properties of
wood coated with urushi lacquer during moisture
absorption and desorption
440
T. Higashihara, M. Inoue, T. Morooka, M.
Norimoto
Stress relaxation of glycerin saturated wood
447
K. Fukuda, R. Sugaya, M. Ohmi, H. Tominaga
Esterification and thermal softening of finely
ground Miscanthus sinensis 452
Proceedings of the Society 458
Original articles
T. Ohuchi, Y. Murase
Milling of wood and wood-based materials
with a computerized numerically controlled
router II: On the machining accuracy for
side milling of groove
465
Y. Kodama, Z. Zhang, H. Kawabata
Evaluation of wood quality by wavelet analysis
II: Estimation of knot size
473
H. Kofujita, Y. Fujino, T. Sssaki, M. Hasebe,
M. Ota, K. Suzuki
Antifungal activities of the bark of Cryptomeria japonica and the related components
479
S. Nagahama, T. Tukamoto, N. Torii, T. Sonoda,
T. Yamanobe
Terpenoids of the wood oil of sugi (Cryptomeria japonica) VII: Cmponents of elite clones Minamatasho-4,
and five others 487
Notes
A. Kawai, I. Iida, Y. Ishimaru
Dynamic behavior of liquid penetration in
softwood 493
N. Yamada, S. Okumura, Y. Taniguchi
High-frequency and microwave heating as a
pretreatment of kiln drying of hollowed timber
501
T. Morita, T. Hayashi, K. Komatsu, Y. Iijima
Proof-loading tests for finger-jointed laminae
I: Investigation of proof-loading test during
glue curing 508
Proceedings of the Society 515