Original articles
X. Chen, S. Ozaki, H. Yonenobu, S. Kimura
The ratio of cut to uncut length and chip
swelling for orthogonal cutting in 0-90 (LT
Plane) 1
H. Ikegiwa, S. Harima, Y. Fujii, S. Okumura
The effect of particle shape on the terminal
velocity 7
A. Kamaguchi, T. Nakao, Y. Kodama
Non-destructive measurement of heartwood
moisture content in sugi (Cryptomeria japonica D. Don) standing tree by lateral impact
vibration method 13
M. Tonosaki, S. Saito
Evaluation of non-homogeneity in wood by
longitudinal and flexural vibration tests
I: Trial on estimation of inner moisture
content of dry-processed sugi boxed heart
square sawn timber 20
H. Wada, K. Masuda, E. Kawasaki, K. Ishitani
Strength properties of composite laminated
wood composed of Z-S treated steel and sugi
(Cryptomeria japonica) finger-jointed lumber: Effect of composition
upon strength by arranging Z-S treated steel
and lamina in composite laminated wood 25
N. Nakamura, K. Horie, Y. Iijima
Analysis of the strength data of wood structures
on limit states design III: Reliability index
and design point on bending strength of structural
lumber 32
K. Nakata, H. Sugimoto, M. Inoue, S. Kawai
Development of compressed wood fasteners
for timber construction III: Bearing characteristics
of compressed LVL plate with a drift-pin 37
A. Sogabe, K. Kinjo, F. Abe, T. Yamauchi,
S. Yaga
Termiticidal substances from the wood and
bark of Wikstroemia retusa A. Gray 47
H. Ogata, K. Ogiyama
Chemical compositions and antipathogenic
activities of the constituent fatty acids
from neutral wax In foliage of Cryptomeria japonoca D.Don 54
Note
H.Hirai, N. Shinzato, A. Nakagawa, Y. Watanabe,
R. Kurane
Degradation of lignin model compounds by
various termites 63
Proceedings of the Society 68
Original articles
E. Obataya, F. Tanaka, M. Norimoto, B. Tomita
Hygroscopicity of heat-treated wood I: Effects
of after-treatments on the hygroscopicity
of heat-treated wood 77
E. Obataya, M. Norimoto, B. Tomita
Moisture dependence of vibrational properties
for heat-treated wood 88
K. Yanaga, T. Hirai
Reduction of effective resistance of nailed
shear walls caused by misnailing: Monte Carlo
simulations on the effective resistance
95
K. Suzuki, N. Ando, T. Tsuctimoto, S. Hirano
Mechanical behavior of wooden frame with
braces under cyclic loading I: degradation
of shear walls with brace under dynamic cyclic
loading 104
K. Ohnishi, Y. Okudaira, M. Zhang, S. Kawai
Manufacture and properties of oriented medium
density fiberboard from non-wood lignocellulosic
fibers I: Development of a mechanical orientor
and its application to manufacturing oriented
fiberboard 115
A. Sogabe, K. Kinjo, F. Abe, T. Yamauchi,
S. Yaga
Termiticidal substances from the heartwood
of Cryptomeria japonica D. Don 125
Notes
Y. Furuta, H. Imanishi, M. Kohara, M. Yokoyama,
Y. Obata, K. Kanayama
Thermal-softening properties of water-swollen
wood VII: The effects of lignin
133
Y. Obata, M. Kohara, Y. Furuta, K. Kanayama
Evaluation of tactile warmth of wood by thermal
effusivity 138
E. Udaka, T. Furuno, M. Inoue
Relationship between the set recovery of
compressive deformation and the moisture
in wood specimen using the closed heating
system 145
N. Kinoshita, M. Yoshinobu
Detection of wood properties using heating
and cooling method I: Detection of wood density
150
N. Kinosita, M. Yosinobu
Detection of wood properties using heating
and cooling method II: Detection of knots
on wood surface 156
K. Sadakata, H. Nobusawa, R. Yamanobe
Experimental design on wooden column-steel
base joint with glue capsule anchor technique
162
Proceedings of the Society 166
Original articles
M. Yokoyama, K. Kanayama, Y. Furuta, M. Norimoto
Mechanical and dielectric relaxations of
wood in a low temperature range III: Application
of sech-law to dielectric properties due
to adsorbed water 173
K. Ikeda, N. Kino
Quality evaluation of standing trees by stress
wave propagation method and its application
I: Seasonal change of moisture contents of
sugi standing trees and evaluation with stress
wave propagation velocity
181
K. Ikeda, T. Arima
Quality evaluation of standing trees by stress
wave propagation method and its application
II: Evaluation of sugi stands and application
to production of sugi (Cryptomeria japonica D. Don) structural squared sawn timber
189
Y. Kodama, Z. Zhang
Evaluation of wood quality by wavelet analysis
I: Wavelet analysis of a knot by tapping
tone of wood 197
K. Nakata, H. Sugimoto, M. Inoue, S. Kawai
Development of compressed wood fasteners
for timber construction IV: Moment resistance
of compressed LVL plate and effect reinforcement
by glass fiber sheets at a joint model
203
M. Harada, T. Hayashi, M. Karube
Effect of deformation rate on bearing properties
of mechanical joints of LVL with a draft-pin
213
M. Kishino, H. Ohi
Cleavage of Ca-Cb bonds of lignin model compounds by nitrite
and nitric acid II: Degradation of a nonphenolic
b-5 type lignin model compound
219
S. Nagahama, T. Iwaoka, T. Ashitani
Terpenoids of the wood oil sugi (Cryptomeria japonica) VI: Components of eliteclone KenKma-3,
KenKoyu-3 and KenAira-14
225
A. Takagaki, K. Fukai, F. Nanjo, Y. Hara,
M. Watanabe, S. Sakuragawa
Application of green tea catechins as a formaldehyde
scavenger 231
Notes
T. Fujimoto, T. Nakano
The effect of mercerization on wood structural
features 238
N. Sobue, K. Matsuo, K. Ikeda
Effect of depth of a sawed slit parallel
to fiber direction on shear modulus of commercial
size squared timbers 242
M. Nakayama, C. Tanaka, T. Ohtani, H. Usuki
Studies on measurement method of surface
roughness in wood machining I: The effect
of stylus types on the roughness profiles
246
Y. Hirashima, T. Nishi
Indoor climate of a piloti-type log construction
252
Proceedings of the Society 258
Review
T. Itoh
Wood and cultural properties
267
Original articles
H. Guan, Y. Nishino, C. Tanaka
Longitudinal natural frequency of wood bar
with the free water distribution in the length
direction 275
Y. Kobayashi, Y. Kawai, I. Miura
Hybrid drying with HF and hot-air under atmospheric
pressure I: Condition of pressure and moisture
in Cryptomeria japonica square lumber 282
T. Higashihara, T. Morooka, M. Norimoto
Permanent fixation of transversely compressed
wood by steaming and its mechanism
291
M. Inoue, T. Hamaguchi, T. Morooka, T. Higashihara,
M. Norimoto, T.Tsunoda
Fixation of compressive deformation of wood
by wet heating under atmospheric pressure
298
Y. Sawada, H. Matsumoto, Y. Fujii, S. Okumura
Pattern recognition of the grinding sound
of bandsaw tooth and its application to the
diagnosis of the grinding process
305
W. Cheng, H. Yokochi, S. Kimura, K. Mano
Dynamic characteristics of the circular saw
in the region of the critical rotation speed
311
S. Naito, Y. Fujii, Y. Sawada, S. Okumura
Thermographic measurement of slope of grain
using thermal anisotropy of wood
320
T. Nishimura, M. Yanagida, N. Ando
Elements' behavior of mats in pressing process
and properties of the boards
326
N. Sekino, A. Suematsu, Y. Fujimoto, Y. Kitani,
Q. Wang
Effect of manufacturing parameters on the
linear expansion of densified wood composite
panels I: Effect of element size and press
temperature 334
T. Seino, A. Yoshioka, M. Fujiwara, K.-L.
Chen, T. Erata, M. Tabata, M. Takai
Electron spin resonance studies on paramagnetic
species produced by milling of wood: Detection
of phenoxy radicals and Mn2+ ion 342
S. Honma, Y. Sano, M. Kubota, K. Umehara,
K. Komazawa
Chemical structure and ammonia adsorption
ability of todomatsu (Abies Sachalinensis Masters) wood carbonized in nitrogen and
air atmospheres 348
M. Mori, Y. Saito, S. Shida, T. Arima
Adsorption property of charcoals from wood-based
materials 355
Notes
R. Huang, I. Furukawa
Correlation between climatic factors and
radial growth of Populus spp. planted in semiarid region in China
363
H. Matsunaga, J. Matsumura, A. Noguchi, K.
Oda
Distribution of inorganic elements in wood
impregnated with preservative solutions I:
Visualization of inorganic elements distribution
in wood by SEM-EDXA 368
Proceedings of the Society 375
Original articles
K. Iizuka, Y. Oribe, M. Ubukata
Clonal variation of the green moisture content
in grafted plus-trees of Abies sachalinensis masters 397
M. Yokoyama, K. Ohmae, K. Kanayama, Y. Furuta,
M. Norimoto
Changes of dielectric relaxation of wood
by acetylation 406
C. Zhao, K. Ando, N. Hattori, S. Kitayama
Size distribution of suspended dust from
wood sanding 413
T. Morooka, M. Norimoto, N. Isoda
Temperature and humidity environment of a
large-scale wooden building
421
K. Fujita, N. Furuta, Y. Sasaki, T. Hirai
Lateral resistance of nailed column-sill
joints with steel side plates
431
N. Sekino, A. Suematsu
In-plane dimensional stability of wood-based
panel products III: Constraint of linear
expansion by nail-joint with or without bonding
441
H. Miyashita, M. Ohmi, H. Tominaga, A. Sawatari,
M. Suzuki, K. Kawarada, K. Mizumoto
The distribution of silicon atoms in sugi
wood treated with g-methacryloxypropyl trimethoxysilane and
its fire retardancy 449
S. Chen, Z. Wu, H. Tanaka
Surface analysis of paper containing polymer
additives by X-ray photoelectron spectroscopy
II: The paper containing n-chloropolyacrylamide
456
H. Matsui, N. Shiraishi
Grafting of cyanoethyl cellulose with fluorine-containing
acrylates and characterization of the products
462
H. Matsui, N. Shiraishi
Dielectric properties of cyanoethyl cellulose
grafted with fluorine-containing acrylates
468
H. Matsui, Y. Kataoka, N. Shiraishi
Surface characteristics of cyanoethyl cellulose
grafted with fluorine-containing acrylate
475
Notes
J.-Z. Li, T. Furuno, S. Katoh, T. Uehara
Wood propionylation at low temperature using
sodium formate as a catalyst
483
A. Harada, S. Gisusi, S. Yoneyama, Y. Kato,
M. Nakaya, K. Seki, M. Tsuda, M. Aoyama
Utilization of kumaizasa (Sasa senanensis Rehd.) as a cultivation substrate of Pleurotus cornucopiae var. citrinopileatus 488
Proceedings of the Society 493
Original articles
R.-F. Huang, I. Furukawa
Horizontal variations of vessel-element length
and wood fiber length of two kinds of Poplars
planted in the desert areas of China
495
K. Kuroda
Anatomical assessment of infection age of
hinoki crypress (Chamaecyparis obtusa) with resinous stem canker and the factors
promoting resinosis 503
K. Yamashita, Y. Hirakawa, Y. Fujisawa, R.
Nakada
Effects of microfibril angles and densities
of variation of moduli of elasticity of sugi
(Cryptomeria japonica D. Don) logs among eighteen cultivars
510
M. Yokoyama, K. Ohmae, K. Kanayama, Y. Furuta,
M. Norimoto
Mechanical and dielectric relaxations of
wood in a low temperature range IV: Dielectric
properties of adsorbed water in high moisture
contents 523
M. Yokoyama, K. Ohmae, M. Norimoto
Changes of dielectric relaxation of wood
by acetylation II. 531
T. Soma, S. Shida, T. Arima
Effect of freeze-treatment on estimating
free water distribution in wood by ultrasonic
wave 540
W. Cheng, H. Yokochi, S. Kimura
Critical rotation speed of circular saw with
step thickness 549
K. Ikeda, S. Oomori, T. Arima
Quality evaluation of standing trees by stress-wave
propagation method and its application III:
Application to sugi (Cryptomeria japonica D. Don) standing plus trees
558
M. Nakamura, M. Masuda
Automatic detection of wood-area in interior
image II: Received wood ratio and wood ratio
of student's rooms 566
K. Komatsu, K.-H. Hwang, K. Hosokawa
Structural performance of glulam semi-rigid
portal frames constructed by using hardwood
wedge joint technique I: Lateral shear performance
of portal frames subjecting to static cyclic
loading 573
M. Fukino, H. Horie, T. Sato, N. Ogawa
Production technology for strand-particle
board (SPB) II: Effect of initial pressure
during hot pressing on thickness swelling
581
T. Kitamura, H. Katayama
Behavior of copper, chromium and arsenic
during carbonization of CCA treated wood
587
Y. Saito, M. Mori, S. Shida, T. Arima
Adsorption and desorption properties of formaldehyde
by wood-based charcoal
596
Note
K. Ikeda, F. Kanamori, T. Arima
Quality evaluation of standing trees by stress
wave propagation method and its application
IV: Application to quality evaluation of
hinoki (Chamaecyparis obutusa Endl) forests 602
Proceedings of the Society 609